Loopback Router - GRASS VALLEY IQMIX25 Series User Manual

RollCall Control Panel

Loopback Router

Loopback Router
The Loopback Router page provides a basic SDI router as a redundant backup in case of
Ethernet failure.
Loopback Router Page
If an Ethernet failure is encountered:
90
1 Use the matrix radio buttons to specify which inputs should be routed to which outputs.
2 Select the Video Flow to Use - SMPTE-2022, RFC4175 or VC2.
3 When set as required, click the Enable Router Control check box to activate routing.