Logging - Fpga - GRASS VALLEY IQMIX25 Series User Manual

RollCall Control Panel

Logging - FPGA

Logging - FPGA
Information on several parameters can be made available to a logging device connected to the
RollCall network. Each logging page comprises three columns:
Logging - FPGA Page
The following options are available. Enable check boxes to activate log fields as required.
Log Field
TEMP_N_NAME=
TEMP_N_CELSIUS=
TEMP_N_STATE=
VOLTAGE_N_NAME=
VOLTAGE_N_VALUE=
Where N is the input number
82
• Log Enable - Select the check boxes that correspond to the parameters for which log
information should be collected.
• Log Field - Displays the name of the logging field.
• Log Value - Displays the current log value.
Description
Reports temperature sensor name.
Reports current temperature sensor reading.
Reports current temperature state. Valid values are:
• WARN:Low - temperature is low, but in tolerance.
• WARN: High - temperature is high, but in tolerance.
• OK
• FAIL:Low - temperature is low and out of tolerance.
• FAIL:High - temperature is high and out of tolerance.
• WARN:Disabled - temperature sensor is disabled.
Voltage sensor name.
Reports current voltage reading.