Card Edge Leds - GRASS VALLEY IQMIX25 Series User Manual

The LEDs on the edge of the module indicate its operating status.
Front Panel

STATUS PB=IDENT
 
BOARD CPU
 
PTP REF
 
8 16
 
7 15
 
6 14
 
5 13
 
4 12
 
3 11
 
2 10
 
1 9
 
SFP 2 QSFP 2
 
SFP 1 QSFP 1
PB=RESET

Card Edge LEDs

Description
STATUS
Green = PTP-LOCK OK
Off = PTP-LOCK Fail
BOARD
Green = CPU clock running.
Off = CPU stopped.
REF 
Green flashing = Watchdog timer OK
1 - 16 - Spigot status.
Off = Input/Spigot not in use.
Red = No input.
Yellow = TPG.
Green = Video flow detected (SDI
input for Sender spigot, output IP
flow for Receiver spigot).
For UHD Quad-Link Modes:
Banks of four adjacent LEDs (e.g. 1 -
4, 5 - 8, etc) will light simultaneously
to denote the 4 x 3G streams being
received on a UHD input. If a TPG is
enabled, either sender or receiver,
four adjacent LEDs will light yellow
to denote the 4 x 3G linked internal
flows.
SFP 1 - 2 = Status/lane. 
Red = Fault (3V3 regulator failure),
Green = OK (10G SFP), Blue = OK
(25G SFP). If flashing, link is down.
QSFP 1 - 2 = Status/lane. 
Red = Fault (3V3 regulator failure),
Cyan = OK (40G QSFP). If flashing,
link is down.
31