Unpacking To Installation; Confirming The Product - Mitsubishi Electric MELFA RH-3CRH Series Instruction Manual

2Unpacking to Installation

2 Unpacking to Installation

2.1 Confirming the product

The standard configuration of the robot arm, part of the purchased product, is shown in
Confirm the parts.
Users who have purchased optional products should refer to the separate "Standard Specifications Manual".
Table 2-1:Standard configuration
No.
RH-3CRH
1 Robot arm
2 Installation bolts
3 Spring washer for installation bolts
4 Plain washer for installation bolts
5 D-sub connector set
RH-6CRH
1 Robot arm
2 Installation bolts
3 Spring washer for installation bolts
4 Plain washer for installation bolts
5 D-sub connector set
Note) Items No. 2 to 5 are contained in the plastic bag of attachment in the robot arm.
2-6 Confirming the product
Part name Type
M8×30
For M8
For M8
M8×30
For M8
For M8
Table
Qty. Remarks
1 unit
4 pcs. For robot arm installation
4 pcs.
4 pcs.
2 sets Connector for fixing the tool wiring
1 unit
4 pcs. For robot arm installation
4 pcs.
4 pcs.
2 sets Connector for fixing the tool wiring
2-1.