Selecting The Origin Setting Method - Mitsubishi Electric MELFA RH-3CRH Series Instruction Manual

5 Maintenance and Inspection

(2) Selecting the origin setting method

<MENU>
1.FILE/EDIT
3.PARAM.
5.SET/INIT.
123
< ORIGIN/ BRAKE >
1 . ORIGIN
123
<ORIGIN>
1.DATA
3.TOOL
5.USER
123
<ORIGIN> DATA
J1( ) J2(
J4( ) J5(
J7( ) J8(
123
◇◆◇ Selecting a menu ◇◆◇
The menu can be selected with one of the following methods.
A: Press the numeral key for the No. of the item to be selected.
B: Using the [↓] and [↑] keys, etc., move the cursor to the item to be selected, and then press the [INP] key.
◇◆◇ The input method of numeral ◇◆◇
The number can be inputted if the key displayed on the lower left of each key is pressed. Press the
[CHARACTER] key, and in the condition that "123" is displayed on the screen lower side, press the number
key.
5-70 Resetting the origin
2.RUN
4.ORIGIN/BRK
6.ENHANCED
CLOSE
2. BRAKE
CLOSE
2.MECH
4.ABS
CLOSE
D:(■ )
) J3( )
) J6( )
)
CLOSE
1) Press the [4] key on the menu screen, and display the
ORIGIN/BRAKE screen.
2) Press the [1] key on the ORIGIN/BRAKE screen, and
display the origin setting method selection screen.
3) Press the [1] key on the origin setting method selection
screen, and select the data input method.
4) Display the origin data input screen