Table of Contents
Advertisement
2 Unpacking to Installation
2.1 Confirming the product
The standard configuration of the robot arm, part of the purchased product, is shown in
Confirm the parts.
Users who have purchased optional products should refer to the separate "Standard Specifications Man-
ual".
Table 2-1:Standard configuration
No.
Part name
1
Robot arm
2
Installation bolts
3
Spring washer for installation bolts
4
Plain washer for installation bolts
2.2 Installation
CAUTION
2.2.1 Unpacking
The robot is shipped from the factory in cardboard packing. For details on transportation of the robot arm,
refer to
"2.2.2 Transportation procedure (with two
CAUTION
1) Cut the banding straps with scissors and open the box.
-
M8 × 35
For M8
For M8
Read the separate Collaborative Robot Safety Manual and following precautions
thoroughly before using this product. Take precautions as necessary.
Always unpack the robot at a flat place. The robot could tilt over if unpacked at an
unstable place.
Type
Qty.
1 unit
4 pcs.
4 pcs.
4 pcs.
people)".
Banding strap
2 Unpacking to Installation
Table
2-1.
Remarks
-
For robot arm installation
Included with the robot controller
Confirming the product 2-3
Hide quick links:
Advertisement
Table of Contents
