Table of Contents
Advertisement
2 Unpacking to Installation
2.1 Confirming the product
The standard configuration of the robot arm, part of the purchased product, is shown in
Confirm the parts.
Users who have purchased optional products should refer to the separate "Standard Specifications".
Table 2-1 ： Standard configuration
No.
Part name
1
Robot arm
2
Guarantee card
3
Installation bolts
4
Installation bolts (Spare)
5
Installation nut
6
Spring washer for installation bolts
7
Plain washer for installation bolts
8
Hanging tools (Eye bolt)
9
Fixing plate
10
Nats for T slot
11
T slot cover
Note1) Items No. 3 to 7 are contained in the plastic bag of attachment in the robot arm.
Note2) Items No. 8 and 9 are installed in the robot arm.
Note3) Item No. 11 is a dustproof cover for T slots in the sides of No.1 arm and No.2 arm of the robot.
Please cut and use the T slot cover to a suitable length.
Type
RH-3FHR series
M8 × 90
M8 × 40
M8
For M8
For M8
M5
1.5m
2Unpacking to Installation
Table
Qty.
Remarks
1 unit
1 copy
4 pcs.
For robot arm installation
4 pcs.
4 pcs.
8 pcs.
8 pcs.
1 set
To hang the robot arm with the crane.
Fixing plates installation bolt: 5 pcs.
1 set
Nuts: 4 pcs.
4 pcs.
For fixing the tool wiring etc.
1 pc.
For Clean/Waterproof specification
Confirming the product
2-1.
2-6
Advertisement
Table of Contents
