Table of Contents
Advertisement
User Manual IO-Link / Modbus TCP Slave
Industrial Electronic Devices
Document code: MN67863_ENG
Revision 1.000
Page 15 of 36
ETHERNET:
The Ethernet connection must be made using Connector5 of HD67863-A1 with at least a Category 5E cable. The maximum length of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a
cross cable.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67863-A1-2A and is the answer not in the manual?
Questions and answers