Table of Contents
Advertisement
User Manual IO-Link / Modbus TCP Slave
Industrial Electronic Devices
Document code: MN67863_ENG
Revision 1.000
Page 14 of 36
IO-L
C
B:
INK
LASS
IO-Link Class B devices uses 5 pins on connectors and they require an additional aux power supply used for the actuation. These devices are
normally actuators.
AUX POWER SUPPLY (for IO-Link Class B):
The Aux Power Supply port is used to provide the additional power supply for the IO-Link Class B. The input voltage is fixed to 24 V DC and
the current depends on the input power required by the IO-Link devices connected to the IO-Link channels Class B.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67863-A1-2A and is the answer not in the manual?
Questions and answers