Snmp Communication - ADF Web HD67155-A1 User Manual

User Manual CAN / SNMP Agent
Document code: MN67155_ENG Revision 1.100 Pagina 26 di 37
Industrial Electronic Devices

SNMP COMMUNICATION

In order to read/write the data from/to CAN side, it is necessary to use specific SNMP commands in order to see the SNMP Input and write
the SNMP Output.
Reading CAN data from SNMP:
In order to read the data from the HD67155-A1/B2, it is necessary to use the GET command.
Each OID defined in the section "Set SNMP Access -> SNMP Read" will be placed in the MIB tree of the converter.
In addition, it will be possible to read the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31