Table of Contents
Advertisement
User Manual SNMP Agent / CANopen
Document code: MN67156_ENG
Revision 1.100
Pagina 30 di 40
Industrial Electronic Devices
SNMP COMMUNICATION
In order to read/write the data from/to CANopen side, it is necessary to use specific SNMP commands in order to see the SNMP Input and
write the SNMP Output.
Reading CAN data from SNMP:
In order to read the data from the HD67156-A1/B2, it is necessary to use the GET command.
Each OID defined in the section "Set SNMP Access -> SNMP Read" will be placed in the MIB tree of the converter.
In addition, it will be possible to read the entire internal map of the converter in memory blocks of 128 bytes: this feature is helpful in phase
of configuration of the converter.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the SNMP Agent / CANopen and is the answer not in the manual?
Questions and answers