Seagull Models ANGEL GLIDER 2000 Assembly Manual page 11

WWW.SEAGULLMODELS.COM
ATTACHMENT WING- FUSELAGE.
INSTALLING THE BATTERY -
RECEIVER.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in the
protective foam rubber to protect them from
vibration.
3) Route the antenna in the antenna tube in-
side the fuselage and secure it to the bottom
of fuselage using a plastic tape.
Wing bolt.
ATTACHMENT HATCH COVER ON
THE FUSELAGE.
Cut
11