7
8
Bild 21/Fig. 21
9701a
Circuitry as normally open
contact
Yellow LED lights up when
output 1 is switched
Fig. 20
Wartung und Pflege
• Reinigen Sie bei Bedarf den
(V)PENV.
Zulässige Reinigungsmedien sind
alle werkstoffschonenden Medien.
Ausbau und Reparatur
• Schalten Sie folgende Energien ab:
– Betriebsspannung
– Druckluft
– Vakuum.
• Drehen Sie die jeweiligen An-
schlüsse heraus.
Circuitry as normally closed
contact
Yellow LED lights up when
output 2 is opened
Maintenance and care
• Clean the (V)PENV when necessary.
All non-abrasive agents can be used
for cleaning.
Dismantling and repair
• Switch off the following:
– operating voltage
– compressed air
– vacuum
• Unscrew the appropriate connections.
Circuitry as changeover
switch
Yellow LED lights up when
output 1 is switched
D/GB 13