Set Bacnet Access - ADF Web HD67704-IP-B2 User Manual

Industrial Electronic Devices

SET BACNET ACCESS:

By Pressing the "Set BACnet Access
4).
Figure 4a: "Set BACnet Access
The window is divided in two parts, the
(only if "DMX OUT" is set); and
"DMX IN" is set).
The means of the fields in the window (BACnet in Read) are the following:
In the field "IP Address /
In the field "Object Type" the object to be read is defined;
In the field "Instance" the instance number of the object is defined;
By checking the field "En
Address (D Adr). These informations are used for make a request to other segments of network (through a BACnet router);
In the field "D Net" the destination network (from 1 to 65535) is defined;
In the field "D Len" the length of "D Add" field (1 or 2 or 6) is defined;
ADFweb.com S.r.l.
" button from the main window of SW67704 (Fig. 2), the window "Set BACnet Access" appears (Fig.
BACnet Read" window
"BACnet Read" that contains the BACnet objects that the converter reads from the BACnet slaves
"BACnet Write" that contains the BACnet objects that the converter writes into the BACnet slaves (only if
ID" the IP address / ID of the slave that contains the data to be read is defined;
Dest" it is possible to enable the Destination Network (D Net), Destination Length (D Len) and Destination
User Manual DMX / BACnet Master
Document code: MN67704_ENG Revision 1.000 Page 18 of 28