Table of Contents
Advertisement
User Manual DMX / BACnet Master
Document code: MN67704_ENG
Revision 1.000
Page 11 of 28
Industrial Electronic Devices
ETHERNET:
The Ethernet port is used for BACnet/IP communication and for programming the device.
The Ethernet connection must be made using Connector2 of HD67704-IP-B2 with at least a Category 5E cable. The maximum length of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC is recommended the use of a cross cable.
ADFweb.com S.r.l.
Advertisement
Table of Contents
