Led Indicators On Intelligent Tap - Omron F3SG-SR Series Manual

LED Indicators on Intelligent Tap

Shown below are indication statuses of LED indicators on the Intelligent Tap when you purchased.
Location Indicator Name
1 IN Sensor status
2 OUT Output status
3 IO-Link IO-Link
4 ERR Lockout
*1. When the safety outputs of the F3SG-SR are in the ON state, the outputs of the Intelligent Tap are in the ON state.
*2. When the safety outputs of the F3SG-SR are in the OFF state, the outputs of the Intelligent Tap are in the OFF state.
Note: In the SETTING state to make settings with the SD Manager 3, the IN, OUT indicators blink. (IN: Yellow, OUT: Green)
For more information on the statuses of the LED indicators in the SETTING state, refer to User's Manual (Man.No.Z405).
Color Illuminated
Safety outputs of the F3SG-SR are in the ON
Yellow
state
Outputs of the Intelligent Tap are in the ON
Green
state(*1)
Outputs of the Intelligent Tap are in the OFF
Red
state (*2)
Green ---
The Intelligent Tap is in the LOCKOUT state,
or has communication error, DIP Switch
circuit error at startup, communication error in
Red
the Backup or Restoration, restoration failure,
IO-Link circuit error, power supply voltage
error or other errors
F3SG-SR/PG
Blinking
The F3SG-SR is in the LOCKOUT state. Or
the Intelligent Tap is waiting for Push Switch
operation (in the Backup) or the Intelligent
Tap and F3SG-SR are waiting for restart (in
the Backup). Or communication error in the
Backup or between the F3SG-SR and the
Intelligent Tap. Or the Restoration failed
The Restoration failed.
Or in the Restoration, the Intelligent Tap has
communication error, is waiting for Push
Switch operation or transferring data, or the
Intelligent Tap and F3SG-SR are waiting for
restart.
Communication error between the F3SG-SR
and the Intelligent Tap
Intelligent Tap communicates with IO-Link
Master. Or IO-Link circuit error
---
65