Omron F3SG-SR Series Manual page 50

F3SG-SR/PG
Model
Input voltage
Electrical
Overvoltage category (IEC 60664-1)
Indicators
Protective circuit
Insulation resistance
Dielectric strength
Mutual interference prevention
Cascade connection
Test function
Functional
Safety-related functions
Ambient
temperature
Ambient
humidity
Environmental Ambient illuminance
Degree of protection (IEC 60529)
Vibration resistance (IEC 61496-1)
Shock resistance (IEC 61496-1)
Pollution degree (IEC 60664-1)
Root cable
Connections
Cascading cable
50
F3SG-@SRA@@@@-14
F3SG-@SRB@@@@-14
Light emission stops when connected to 24 V DC
ON voltage:
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 6.0 mA) *
TEST
Light emission stops when connected to 0 V
ON voltage:
OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 5.0 mA) *
OPERATING
Long: 12 V to Vs (short circuit current: approx. 4.2 mA) * or open
RANGE SELECT
Short: 0 to 3 V (short circuit current: approx. 4.2 mA)
INPUT
PNP ON voltage:
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 13.0 mA) *
RESET/EDM
NPN ON voltage:
OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 9.5 mA) *
PNP ON voltage:
OFF voltage: 0 V to 1/2 Vs, or open (short circuit current: approx. 7.0 mA) *
MUTE A/B,
RE-RESET, PSDI NPN ON voltage:
OFF voltage: 1/2 Vs to Vs, or open (short circuit current: approx. 4.5 mA) *
* The Vs indicates a supply voltage value in your environment.
II
Refer to page 63
Output short-circuit protection
20 MΩ or higher (500 VDC megger)
1,000 VAC, 50/60 Hz (1 min)
Optical synchronization by Scan Code: in up to 2 sets
Wired synchronization: in up to 3 sets
Number of cascaded segments: 3 max.
Total number of beams: 255 max.
Self-test (at power-on, and during operation)
External test (light emission stop function by test input)
Interlock
External Device Monitoring (EDM)
Pre-Reset
PSDI
Fixed Blanking/Floating Blanking
Reduced Resolution
Muting/Override
Mutual Interference Prevention
PNP/NPN Selection
Response Time Adjustment
Operating -30 to 55 °C (non-icing)
Storage -30 to 70 °C
Operating 35% to 85% (non-condensing)
Storage 35% to 95%
Incandescent lamp: 3,000 Ix max. on receiver surface
Sunlight: 10,000 Ix max. on receiver surface
IEC 60529: IP65 and IP67, JIS C 0920 Annex 1: IP67G
10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
100 m/s 2 , 1000 shocks for all 3 axes
3
To sensors: dedicated connector, To external: M12 connector type (5-pin emitter and 8-pin receiver) or
open-ended type
Type of
IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated.
connection
* The F3SG-SR meets the degree of protection when the root cable is correctly connected with the F3SG-
SR. The degree of protection is not satisfied with the part where cable wires are uncovered.
Number of wires Emitter: 5, Receiver: 8
Cable length Refer to page 38
Cable diameter 6 mm
Minimum bending
R5 mm
radius
To sensors: dedicated connector, To cascading sensors: M12 connector type (5-pin emitter and 8-pin
receiver) or dedicated connector
Type of
IP67 and IP67G (JIS C 0920 Annex 1) * rated when mated.
connection
* The F3SG-SR meets the degree of protection when the cascading cable is correctly connected with the
F3SG-SR and the root cable.
Number of wires Emitter: 5, Receiver: 8
Cable length Refer to page 40
Cable diameter 6 mm
Minimum bending
R5 mm
radius
F3SG-@SRA@@@@-25 F3SG-@SRA@@@@-45
F3SG-@SRB@@@@-25 F3SG-@SRB@@@@-45
Vs-3 V to Vs (short circuit current: approx. 5.0 mA) *
0 to 3 V (short circuit current: approx. 6.0 mA)
Vs-3 V to Vs (short circuit current: approx. 9.5 mA) *
0 to 3 V (short circuit current: approx. 13.0 mA)
Vs-3 V to Vs (short circuit current: approx. 4.5 mA) *
0 to 3 V (short circuit current: approx. 7.0 mA)
F3SG-@SRA@@@@-85
F3SG-@SRB@@@@-85