The Advanced Setup Screen - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

7.8 The Advanced Setup Screen

To configure advanced wireless settings, click Network > Wireless LAN >
Advanced Setup. The screen appears as shown.
Figure 47 Wireless LAN > Advanced Setup
The following table describes the labels in this screen.
Table 25 Wireless LAN > Advanced Setup
LABEL
RTS/CTS
Threshold
Fragmentatio
n Threshold
Number of
Wireless
Stations
Allowed
Output Power Set the output power of the ZyXEL Device. If there is a high density of APs
Multicast
Rate
P-870HW-51a v2 User's Guide
DESCRIPTION
Enter a value between 0 and 2432.
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
Specify the maximum number (from 1 to 64) of the wireless stations that
may connect to the ZyXEL Device.
in an area, decrease the output power to reduce interference with other
APs. Select one of the following 20%, 40%, 60%, 80% or 100%.
Select a data rate at which the ZyXEL Device transmits wireless multicast
traffic.
If you select a high rate, multicast traffic may occupy all the bandwidth
and cause metwork congestion.
Chapter 7 Wireless LAN
93