Table of Contents
Advertisement
2 Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed otherwise it
is best to leave this alone, the configurator will automatically compute a subnet mask
based upon the IP address you entered.
3 Click Apply to save your settings.
Figure 40 Network > LAN > IP
The following table describes the fields in this screen.
Table 23 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
6.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your ZyXEL Device's RIP, multicast, Any IP and Windows Networking
settings. Click the Advanced Setup button in the LAN IP screen. The screen appears as
shown.
P-660HN-FxZ Series User's Guide
DESCRIPTION
Enter the LAN IP address you want to assign to your ZyXEL Device in dotted
decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example
255.255.255.0 (factory default). Your ZyXEL Device automatically computes the
subnet mask based on the IP Address you enter, so do not change this field
unless you are instructed to do so.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced LAN Setup screen and edit more details of
your LAN setup.
Chapter 6 LAN Setup
91
Advertisement
Table of Contents
Troubleshooting
