11.5 The Class Setup Screen
Use this screen to add, edit or delete QoS classifiers. A classifier groups traffic into
data flows according to specific criteria such as the source address, destination
address, source port number, destination port number or incoming interface. For
example, you can configure a classifier to select traffic from the same protocol
port (such as Telnet) to form a flow.
You can give different priorities to traffic that the ZyXEL Device forwards out
through the WAN interface. Give high priority to voice and video to make them run
more smoothly. Similarly, give low priority to many large file downloads so that
they do not reduce the quality of other applications.
Click QoS > Class Setup to open the following screen.
Figure 66 QoS Class Setup
The following table describes the labels in this screen.
Table 40 QoS Class Setup
LABEL
Add
Class Name
Order
CLASSIFICATION CRITERIA
This section shows criteria specified in this classifier.
Class Intf
Ether Type
SrcMAC /Mask
P-870HW-51a v2 User's Guide
DESCRIPTION
Click this button to create a new classifier.
This is the name of the classifier.
This field displays the index number of the classifier.
This shows the interface through which traffic that matches this
classifier is forwarded out.
This is the service type.
This shows the source MAC address and the mask of traffic of this
class.
Chapter 11 Quality of Service (QoS)
133