The Ip Alias Screen - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

Click Network > LAN > Client List to open the following screen. Use this screen
to change your ZyXEL Device's static DHCP settings.
Figure 35 LAN > Client List
The following table describes the labels in this screen.
Table 15 LAN > Client List
LABEL
IP Address
MAC Address
Add Entries
#
IP Address
MAC Address
Remove

6.6 The IP Alias Screen

IP alias allows you to partition a physical network into different logical networks
over the same Ethernet interface. The ZyXEL Device supports three logical LAN
interfaces via its single physical Ethernet interface with the ZyXEL Device itself as
the gateway for each LAN network.
When you use IP alias, you can also configure firewall rules to control access
between the LAN's logical networks (subnets).
P-870HW-51a v2 User's Guide
DESCRIPTION
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
Enter the MAC address of a computer on your LAN.
Click this to add a static DHCP entry before the dynamic DHCP
entry(ies).
This is the index number of the static IP table entry (row).
This field displays the IP address relative to the # field listed above.
The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
Click this to delete a static DHCP entry. You cannot delete a dynamic
DHCP entry. A window displays asking you to confirm that you want to
delete the selected entry.
Chapter 6 LAN Setup
73