Table 44 TR-069 (continued)
LABEL
Connection
Request
Password
Connection
Request URL
Apply/Save
Cancel
13.3 The Service Control Screen
Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which
ZyXEL Device interface.
Figure 70 Service Control
P-870HW-51a v2 User's Guide
DESCRIPTION
Enter the connection request password.
When the ACS makes a connection request to the ZyXEL Device, this
password is used to authenticate the ACS.
This shows the connection request URL.
The ACS can use this URL to make a connection request to the ZyXEL
Device.
Click this button to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 13 Remote Management
145