Before You Begin; The Lan Ip Screen - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

6.3 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to
the DHCP Client List screen.

6.4 The LAN IP Screen

Click Network > LAN to open the IP screen. See
background information. Use this screen to set the Local Area Network IP address
and subnet mask of your ZyXEL Device.
Follow these steps to configure your LAN settings.
Enter an IP address into the IP Address field. The IP address must be in dotted
1
decimal notation. This will become the IP address of your ZyXEL Device.
Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
2
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
Click Apply to save your settings.
3
Figure 34 LAN > IP
P-870HW-51a v2 User's Guide
Chapter 6 LAN Setup
Section 6.7 on page 75 for
71