Client List - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

Table 7 Status > LAN Statistics (continued)
LABEL
Set Interval
Stop

4.1.5 Client List

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients to obtain TCP/IP configuration at start-up from a server. You can
configure the ZyXEL Device as a DHCP server or disable it. When configured as a
server, the ZyXEL Device provides the TCP/IP configuration for the clients. If DHCP
service is disabled, you must have another DHCP server on your LAN, or else the
computer must be manually configured.
Click Status > Client List to open the following screen. The read-only DHCP table
shows current DHCP client information (including IP Address, Host Name and
MAC Address) of all network clients using the ZyXEL Device's DHCP server.
Figure 25 Status > Client List
The following table describes the labels in this screen.
Table 8 Status > Client List
LABEL
Host Name
MAC Address
IP Address
P-870HW-51a v2 User's Guide
DESCRIPTION
Click this button to apply the new poll interval you entered in the
Refresh Interval field.
Click Stop to stop refreshing statistics.
DESCRIPTION
This indicates the computer host name.
Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
This indicates the MAC address of the client computer.
This indicates the IP address assigned to this client computer.
Chapter 4 Status Screens
47