Chapter 16 Logs
The log wraps around and deletes the old entries after it fills.
Figure 90 Maintenance > Logs > View Log
The following table describes the fields in this screen.
Table 51 Maintenance > Logs > View Log
LABEL
Display
Refresh
#
Date/Time
Facility
Severity
Message
16.3 The Log Settings Screen
Use the Log Settings screen to configure to where the ZyXEL Device is to send
logs and which logs and/or immediate alerts the ZyXEL Device is to record and
display.
170
DESCRIPTION
Select a category of logs to view. The ZyXEL Device displays the logs with
the severity level equal to or higher than what you selected.
The order of the log severity (from the highest to the lowest) is
Emergency > Alert > Critical > Error > Warning > Notice > Informational
> Debugging.
Click this button to renew the log screen.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
This field displays the system module from which the logs come.
This field displays the severity type of the log.
This field states the reason for the log.
P-870HW-51a v2 User's Guide