Chapter 13 Remote Management
The following table describes the fields in this screen.
Table 45 Access Control: Services
LABEL
Service Control
Mode
Services
LAN
WAN
Save/Apply
13.4 The IP Address Screen
Click Advanced > Remote MGMT > IP Address to open the following screen.
Use this screen to specify the "trusted" computers from which an administrator
may use a service to manage the ZyXEL Device.
Figure 71 IP Address
The following table describes the fields in this screen.
Table 46 IP Address
LABEL
Access Control
Mode
IP Address
146
DESCRIPTION
Select Enable to turn on service control. Otherwise, select Disable.
This is the service you may use to access the ZyXEL Device.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
Click this button to save your changes back to the ZyXEL Device.
DESCRIPTION
Select Enable to activate the secured client list. Select Disable to
disable the list without deleting it.
This is the IP address of the trusted computer from which you can
manage the ZyXEL Device.
P-870HW-51a v2 User's Guide