Main Window; Status Bar - ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual

Chapter 3 Introducing the Web Configurator
Table 2 Navigation Panel Summary
LINK TAB
QoS General
Queue Setup
Class Setup
Dynamic DNS
Remote TR069
MGMT
ServiceControl
IPAddress
UPnP General
Maintenance
System General
Time Setting
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart

3.2.2 Main Window

The main window displays information and configuration fields. It is discussed in
the rest of this document.
Right after you log in, the Status screen is displayed. See
for more information about the Status screen.

3.2.3 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration
has been updated.
38
FUNCTION
Use this screen to enable QoS.
Use this screen to configure QoS queues.
Use this screen to define a classifier.
This screen allows you to use a static hostname alias for a
dynamic IP address.
Use this screen to configure the ZyXEL Device to be managed by
an ACS (Auto Configuration Server).
Use this screen to configure which services/protocols can access
which ZyXEL Device interface.
Use this screen to configure from which IP address(es) users can
manage the ZyXEL Device.
Use this screen to turn UPnP on or off.
Use this screen to configure your device's name, domain name,
management inactivity timeout and password.
Use this screen to change your ZyXEL Device's time and date.
Use this screen to view the logs for the level that you selected.
Use this screen to change your ZyXEL Device's log settings.
Use this screen to upload firmware to your device.
Use this screen to backup and restore your device's configuration
(settings) or reset the factory default settings.
This screen allows you to reboot the ZyXEL Device without turning
the power off.
Chapter 4 on page 39
P-870HW-51a v2 User's Guide