Chapter 6 LAN Setup
Note: Make sure that the subnets of the logical networks do not overlap.
The following figure shows a LAN divided into subnets A and B.
Figure 36 Physical Network & Partitioned Logical Networks
Ethernet
Interface
6.6.1 Configuring the LAN IP Alias Screen
Click Network > LAN > IP Alias to open the following screen. Use this screen to
change your ZyXEL Device's IP alias settings.
Figure 37 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 16 Network > LAN > IP Alias
LABEL
Active IP Alias
IP Address
IP Subnet Mask
Apply
74
DESCRIPTION
Select the check box to configure another LAN network for the ZyXEL
Device.
Enter the IP address of your ZyXEL Device in dotted decimal notation.
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default).
Click this to save your changes back to the ZyXEL Device.
A: 192.168.1.1 - 192.168.1.24
B: 192.168.2.1 - 192.168.2.24
P-870HW-51a v2 User's Guide