ZyXEL Communications ZyXEL Prestige P-870HW-51a v2 User Manual page 136

Chapter 11 Quality of Service (QoS)
Table 41 QoS Class Configuration (continued)
LABEL
Interface
Order
Ether Type
Tag Configuration
Assign
Classification
Queue
Mark
Differentiated
Services Code
Point (DSCP)
Mark 802.1p
priority
Tag VLAN ID
Set Rate
Control(kbps)
Filter Configuration
Use the following fields to configure the criteria for traffic classification.
Source
Address
Subnet Mask
Port
MAC Address
136
DESCRIPTION
Select from which Ethernet port traffic of this class should come.
Select Local for any traffic from the LAN.
Select an existing number for where you want to put this classifier to
move the classifier to the number you selected after clicking Apply.
Select Last to put this rule in the back of the classifier list.
Select a predefined application to configure a class for the matched
traffic.
If you select IP, you also need to configure source or destination MAC
address, IP address, DHCP options, DSCP value or the protocol type.
If you select 8021Q, you can only configure a 802.1p priority level.
Select a queue that applies to this class.
You should have configured a queue in the Queue Setup screen
already.
Select a DSCP value with which the ZyXEL Device replaces the DSCP
field in the packets.
If you select Auto Marking and there is a VLAN tag carried in the
matched packets, the ZyXEL Device will replace the IP ToS field with
the 802.1p priority field.
Select default to set the DSCP value in the matched packets to 0.
Select a priority level with which the ZyXEL Device replaces the IEEE
802.1 priority field in the packets.
Select a VLAN ID number (between 0 and 4095) with which the ZyXEL
Device replaces the VLAN ID of the frames.
Enter the transmission rate (in Kbps) for traffic that matches this QoS
class
Enter the source IP address in dotted decimal notation.
Enter the source subnet mask.
If you select a protocol type, enter the port number(s) of the source.
0 means any source port number.
Enter the source MAC address of the packet.
P-870HW-51a v2 User's Guide