Maintenance; Cleaning; Warranty And Service - Conel CLEAR 2.0 SAFE Operating Instructions Manual

Water leak sensor
Table of Contents

Advertisement

Available languages

Available languages

7

MAINTENANCE

7.1

CLEANING

To clean the housing use only clear drinking water.
Substances with a distinct polar character, e.g. alcohol, concentrated mineral acids, formic acid, phenol, m-
cresol, tetrahydrofuran, pyridine, dimethylformamide and mixtures of chloroform and methanol must not
be in the cleaning water.
These substances can chemically attack the plastic parts resulting in embrittlement and even breakage.
Standard domestic all purpose cleaners and glass cleaners, solvents, solvent va-
pours, varnish and alcohol containing cleaning agents lead to embrittlement and
severe surface crack formation up to the point where plastic parts break.
Therefore do not use these types of cleaner!
7.2

WARRANTY AND SERVICE

Routine servicing must be performed in accordance with DIN EN 806-5 according
to the relevant manufacturer's instructions.
For this purpose we stipulate a visual and functional check of the device every
6 months.
A service contract is the best way of ensuring correct operation even after the warranty period has
elapsed.
It is desirable that the regular maintenance work and the supply of wear parts is performed by a technical
service provider or the factory customer service team.
45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLEAR 2.0 SAFE and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents