About These Operating Instructions - Conel CLEAR 2.0 SAFE Operating Instructions Manual

28
1

ABOUT THESE OPERATING INSTRUCTIONS

These operating instructions must always be available at the place of use of the
control sensor.
These operating instructions should simplify getting to know your control sensor and inform you of its in-
tended applications.
The operating instructions contain important information so that you can use the control sensor, safely,
professionally and economically. They contain basic information that must be observed during installation,
operation and maintenance.
Observance of this information will help to avoid dangers, reduce repair costs and increase the reliability
and service life of the control sensor.
The operating instructions must be read by each person charged with working on the control sensor, e.g.
for:
/ Installation,
/ Operation,
/ Maintenance (service, inspection, repair).
Installation and maintenance must only be performed by personnel who have been authorised by the man-
ufacturer to do so, i.e. who are able to fulfil the instructions referred to in the installation and operating in-
structions as well as country-specific regulations.
Alongside the operating instructions and the legal regulations applicable in the country and place of use in
respect of accident prevention, the recognised technical regulations for safe and professional work must
be observed.
Therefore, these operating instructions must be read by the installer and the responsible technical person-
nel/operators prior to installation, commissioning and maintenance.
Not only must the general safety instructions listed in chapter 4.1 "INTENDED USE" be
observed, but also the specific safety instructions that are included under the other main
points.