Figure 8 Change Password Screen; Figure 9 Replace Certificate Screen - ZyXEL Communications P-2602HWLNI User Manual

If you do not change the password, the following screen appears every time
you log in with the default password.

Figure 8 Change Password Screen

4 Click Apply in the Replace Certificate screen to create a certificate using your ZyXEL
Device's MAC address that will be specific to this device. This screen displays only
when you log in as an administrator.

Figure 9 Replace Certificate Screen

5 A screen displays to let you choose whether to go to the wizard or the advanced screens.
• Click Go to Wizard setup if you are logging in for the first time or if you want to make
basic changes. The wizard selection screen appears after you click Apply. See
on page 63
• Click Go to Advanced setup if you want to configure features that are not available in the
wizards. Select the check box if you always want to go directly to the advanced screens.
The main screen appears after you click Apply. See
information.
• Click Exit if you want to log out.
P-2602HWLNI User's Guide
for more information.
Chapter 2 Introducing the Web Configurator
Section 2.3 on page 52
Chapter 3
for more
51