Table of Contents
Advertisement
Chapter 18 VPN Screens
Table 105 Local ID Type and Content Fields
LOCAL ID TYPE= CONTENT=
IP
DNS
E-mail
Table 106 Peer ID Type and Content Fields
PEER ID TYPE= CONTENT=
IP
DNS
E-mail
18.9.1 ID Type and Content Examples
Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
The two ZyXEL Devices in this example can complete negotiation and establish a VPN
tunnel.
Table 107 Matching ID Type and Content Configuration Example
ZYXEL DEVICE A
Local ID type: E-mail
Local ID content: tom@yourcompany.com
Peer ID type: IP
Peer ID content: 1.1.1.2
282
Type the IP address of your computer or leave the field blank to have the ZyXEL
Device automatically use its own IP address.
Type a domain name (up to 31 characters) by which to identify this ZyXEL Device.
Type an e-mail address (up to 31 characters) by which to identify this ZyXEL
Device.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
Type the IP address of the computer with which you will make the VPN connection
or leave the field blank to have the ZyXEL Device automatically use the address in
the Secure Gateway field.
Type a domain name (up to 31 characters) by which to identify the remote IPSec
router.
Type an e-mail address (up to 31 characters) by which to identify the remote IPSec
router.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address. The domain name also does not have to match the remote router's IP
address or what you configure in the Secure Gateway Addr field below.
ZYXEL DEVICE B
Local ID type: IP
Local ID content: 1.1.1.2
Peer ID type: E-mail
Peer ID content: tom@yourcompany.com
P-2602HWLNI User's Guide
Advertisement
Table of Contents
Troubleshooting
