Table 138 Remote Management: HTTP
LABEL
Access Status Select a ZyXEL Device interface from Access Status on which incoming HTTPS
Secure Client
IP
Apply
Cancel
23.4 Telnet
You can configure your ZyXEL Device for remote Telnet access as shown next. The
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.
Figure 196 Telnet Configuration on a TCP/IP Network
23.5 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
P-2602HWLNI User's Guide
DESCRIPTION
access is allowed.
You can allow only secure web configurator access by setting the HTTP Access
Status field to Disable and setting the HTTPS Access Status field to an
interface(s).
A secure client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your settings back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 23 Remote Management Configuration
347