Static Wep; Figure 84 Wireless Lan > Wds; Table 47 Wireless Lan > Wds - ZyXEL Communications P-2602HWLNI User Manual

Figure 84 Wireless LAN > WDS
The following table describes the fields in this screen.
Table 47 Wireless LAN > WDS
LABEL
Remote Bridge MAC Address
#
Active
MAC Address
Security
Security Mode
Apply
Cancel

9.10.1 Static WEP

Choose Static WEP from the Security Mode list.
P-2602HWLNI User's Guide
DESCRIPTION
This is the index number of the individual WDS link.
Select this to activate the link between the ZyXEL Device and the peer device
to which this entry refers. When you do not select the check box this link is
down.
Type the MAC address of the peer device in a valid MAC address format, six
hexadecimal character pairs, 12:34:56:78:9a:bc, for example.
Select one of the security settings.
• No Security
• Static WEP
• WPA-PSK
• WPA2-PSK
If you select No Security, the data sent between APs is not encrypted.
Anyone can read it. See the following sections for more information.
Note: Other APs must use the same encryption method on
security settings to enable WDS security.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to return to the previous screen.
Chapter 9 Wireless LAN
149