ZyXEL Communications P-2602HWLNI User Manual page 89

Table 17 Status Screen
LABEL
MAC Address
ZyNOS
Firmware
Version
DSL Firmware
Version
WAN Information
DSL Mode
IP Address
IP Subnet
Mask
Default
Gateway
VPI/VCI
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN
Information
SSID
Channel
Security
Security
Firewall
Content Filter
System Status
System
Uptime
P-2602HWLNI User's Guide
DESCRIPTION
This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
This field displays the current version of the device's DSL modem code.
This is the DSL standard that your ZyXEL Device is using.
This field displays the current IP address of the ZyXEL Device in the WAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in
the wizard or WAN screen.
This field displays the current IP address of the ZyXEL Device in the LAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
("W" models only)
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the wireless
LAN.
This displays whether or not the ZyXEL Device's firewall is activated. Click this to
go to the screen where you can change it.
This displays whether or not the ZyXEL Device's content filtering is activated. Click
this to go to the screen where you can change it.
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see
47).
Chapter 6 Status Screens
Section 1.6 on page
89