Table of Contents
Advertisement
C
H A P T E R
This chapter contains information about configuring bandwidth management, editing rules and
viewing the ZyXEL Device's bandwidth management logs.
21.1 Bandwidth Management Overview
ZyXEL's Bandwidth Management allows you to specify bandwidth management rules based
on application. You can allocate specific amounts of bandwidth capacity (bandwidth budgets)
to different bandwidth rules.
The ZyXEL Device applies bandwidth management to traffic that it forwards out through an
interface. The ZyXEL Device does not control the bandwidth of traffic that comes into an
interface.
Bandwidth management applies to all traffic flowing out of the router, regardless of the
traffic's source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the ZyXEL Device
and be managed by bandwidth management.
21.2 Application-based Bandwidth Management
You can create bandwidth classes based on individual applications (like Web, FTP and E-mail,
for example).
21.3 Auto Classifier
Automatic Traffic Classifier (ATC) is a bandwidth management tool that prioritizes data
packets sent across the network. ATC assigns each packet a priority and then queues the packet
accordingly. Packets assigned a high priority are processed more quickly than those with low
priority if there is congestion, allowing time-sensitive applications to flow more smoothly.
Time-sensitive applications include both those that require a low level of latency (delay) and a
low level of jitter (variations in delay) such as Voice over IP or Internet gaming, and those for
which jitter alone is a problem such as Internet radio or streaming video.
P-2602HWLNI User's Guide
Bandwidth Management
21
331
Advertisement
Table of Contents
Troubleshooting
