Table of Contents
Advertisement
Table 166 802.1X Logs (continued)
LOG MESSAGE
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
Local User Database does not
support authentication method.
No response from RADIUS. Pls
check RADIUS Server.
Use Local User Database to
authenticate user.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
No Server to authenticate user.
Local User Database does not
find user`s credential.
Table 167 ACL Setting Notes
PACKET DIRECTION
(L to W)
(W to L)
(L to L/ZyXEL Device)
(W to W/ZyXEL
Device)
Table 168 ICMP Notes
TYPE
CODE
0
0
3
0
1
2
3
4
5
4
P-2602HWLNI User's Guide
DESCRIPTION
The router logged out a user from which there was no
authentication response.
The router logged out a user whose idle timeout period
expired.
A user logged out.
A user tried to use an authentication method that the
local user database does not support (it only supports
EAP-MD5).
There is no response message from the RADIUS server,
please check the RADIUS server.
The local user database is operating as the
authentication server.
server.
There is no authentication server to authenticate a user.
A user was not authenticated by the local user database
because the user is not listed in the local user database.
DIRECTION
DESCRIPTION
LAN to WAN
ACL set for packets traveling from the LAN to the WAN.
WAN to LAN
ACL set for packets traveling from the WAN to the LAN.
LAN to LAN/
ACL set for packets traveling from the LAN to the LAN or
ZyXEL Device
the ZyXEL Device.
WAN to WAN/
ACL set for packets traveling from the WAN to the WAN
ZyXEL Device
or the ZyXEL Device.
DESCRIPTION
Echo Reply
Echo reply message
Destination Unreachable
Net unreachable
Host unreachable
Protocol unreachable
Port unreachable
A packet that needed fragmentation was dropped because it was set to Don't
Fragment (DF)
Source route failed
Source Quench
Chapter 27 Logs
397
Advertisement
Table of Contents
Troubleshooting
