Table 5-4 Extended At* Command Sets - ZyXEL Communications Omni 56K II User Manual

5.1.3 Extended AT* Command Sets
COMMAND OPTIONS
*Cn
*C0 *
*C1
*C2
*C3
*Dn n=0-3
*D0 *
*En
*E0 *
*E1
*Gn *G0
*G1
*G2
*G3
*G4
*G5
*G9
Command Sets

Table 5-4 Extended AT* Command Sets

FUNCTION & DESCRIPTION
Character length, including start, stop and parity
bit.
10-bit character length
11-bit character length
9-bit character length
8-bit character length
Set the default dial pointer at telephone directory
location 'n.'
(See also S35.4 and S38.0)
Modem error control negotiation.
If error control negotiation fails, keep the non-error
control connection.
If error control negotiation fails, disconnect the call
(hang-up).
Disables the security function. (Default)
Enables type 1 security, with password check.
Enables type 1 security, with password check and
call back.
Enables type 2 security, with password check.
Enables type 2 security, with password check and
call back.
Enables type 2 security, with password check and
call back; remote site enters the callback number.
Resets the supervisor password to "ZyXEL".
Omni 56K II and Omni 56K Plus II User's Guide
REF.
S15.3-4
S29
S21.0
5-9