Table of Contents
Advertisement
Omni 56K II and Omni 56K Plus II User's Guide
COMMAND
OPTIONS
&T4
&T5
&T6
&T7
&T8
&Vn
&V0
&V1
&V2
&W
&Yn
&Y0
&Y1 *
&Y2
&Z?
&Zn=s
n=0-3
5-8
FUNCTION & DESCRIPTION
Grant a Remote Digital Loop-back request from a
remote modem.
Deny a Remote Digital Loop-back request from a
remote modem.
Initiate a Remote Digital Loop-back (RDL) test.
Initiate a Remote Digital Loop-back test with self-
test. (RDL+ST)
Initiate an Analog Loop-back test with self-test.
(ALB+ST)
View the profile settings.
View the current active settings.
View the user profile settings.
View the factory default settings.
Save the current settings to user profile in
nonvolatile RAM. (See also S35.6)
Break handling. Destructive Break clears the buffer.
Expedited Break is sent immediately to the remote
system.
Destructive, expedited.
Nondestructive, expedited.
Nondestructive, unexpedited.
Display all the phone numbers stored in nonvolatile
RAM.
Store phone number/s to NVRAM at location n (n=0-
3) use AT*Dn or ATS29=n to set the default dial
pointer.
REF.
S14.1
S14.1
S28.2-3
Command Sets
Advertisement
Table of Contents
