ZyXEL Communications Omni 56K II User Manual page 61

COMMAND
Minimum scan time/line: 10 ms (normal); 5 ms (fine).
Minimum scan time/line: 10 ms.
Minimum scan time/line: 20 ms (normal); 10ms (fine).
Minimum scan time/line: 20 ms.
Minimum scan time/line: 40 ms (normal); 20ms (fine).
Minimum scan time/line: 40 ms.
+FDCS=vr,br,wd,l Current session parameters; refer to the +FDCC command.
n,df,ec,bf,st
+FDIS=vr,br,wd,l Current session negotiation parameters; refer to the +FDCC command.
n,df,ec,bf,st
+FDR This initiates document reception after receiving a phase C data command.
+FDT=df,vr,wd, ln Transmits a phase C data command: release the DCE to proceed with
negotiation.
+FET=n End of page or document command:
More pages; same document.
End of document; another document follows.
No more pages or documents.
Procedure interrupt; another page follows.
Procedure interrupt; end of document, another document follows.
Procedure interrupt; end of document.
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
+FLO=n Flow control options.
No flow control.
Set the XON/XOFF software flow control.
Set the CTS/RTS hardware flow control.
+FLPL=n This command indicates the availability of documents for polling.
The DTE has no document available for polling.
Command Sets
Omni 56K II and Omni 56K Plus II User's Guide
DESCRIPTION VALUE
st=2
st=3
st=4
st=5
st=6
st=7
n=0
n=1
n=2
n=4
n=5
n=6
n=0
n=1
n=2
n=0
5-15