Table 5-3 Extended At& Command Sets - ZyXEL Communications Omni 56K II User Manual

Omni 56K II and Omni 56K Plus II User's Guide
COMMAND OPTIONS
V1 *
Xn n=0-7
5 *
Zn n=0-2
Zn
Z2
+++
5.1.2 Extended AT& Command Sets
COMMAND OPTIONS
&Bn
&B0
&B1 *
&Cn
&C0
&C1 *
&Dn
&D0
&D1
&D2 *
&D3
&F
5-4
FUNCTION & DESCRIPTION
Displays the result code in verbose form.
Result code options, see Table 4-1.
Resets the modem and set power-on profile.
Resets the modem and load user profile n (0-1).
Resets the modem and load factory settings.
This is the escape sequence code. When entered,
the modem returns to online command mode.
Table 5-3 Extended AT& Command Sets
FUNCTION & DESCRIPTION
Data rate, terminal-to-modem. (DTE/DCE)
The DTE rate follows the connection rate. (See also
S44.6)
The DTE/DCE rates are fixed at the DTE setting
(See also S18, S20, and S44.6)
Carrier Detect (CD) options
CD always ON (See also S42.7)
CD tracks the presence of carrier (See also S38.3,
S42.7)
Data Terminal Ready (DTR) options. (See also S25)
Ignore DTR signal, assume DTR is always ON.
108.1, DTR OFF-ON transition causes dialing of the
default number. (See also 'AT*Dn' and S48.4)
108.2, Data Terminal Ready, DTR OFF causes the
modem to hang up.
Same as &D2 but DTR OFF causes the modem to
hang up and reset from profile 0.
Load factory settings to RAM as active configuration.
REF.
S23.3-5
S15.5-7
REF.
S28.6
S21.4
S21.6-7
Command Sets