ZyXEL Communications Omni 56K II User Manual page 60

Omni 56K II and Omni 56K Plus II User's Guide
COMMAND
+FCR=n
+FDCC=vr,br,wd,
ln,df,ec,bf,st
5-14
Only check 1D phase C data.
Check both 1D and 2D phase C data.
"Capability to receive" parameter.
DCE will not receive message data or poll a remote device.
DCE receives message data or polls a remote device.
Sets the DCE capabilities parameters.
Sets Vertical resolution to Normal (98 lpi).
Sets Vertical resolution to Fine (196 lpi).
Bit rate: 2400 bit/s; V.27ter.
Bit rate: 4800 bit/s; V.27ter.
Bit rate: 7200 bit/s; V.29 or V.17.
Bit rate: 9600 bit/s; V.29 or V.17.
Bit rate: 12000 bit/s; V.17.
Bit rate: 14400 bit/s; V.17.
Page width: 1728 pixels in 215mm.
Page width: 2048 pixels in 255mm.
Page width: 2432 pixels in 303mm.
Page length: A4; 297mm.
Page length: B4; 364mm.
Page length: unlimited length.
Data compression format: 1-D; modified Huffman.
Data compression format: 2-D; modified Read.
Disables Error correction.
Disables binary file transfer.
Minimum scan time/line: 0 ms.
Minimum scan time/line: 5 ms.
DESCRIPTION VALUE
n=1
n=2
n=0
n=1
vr=0
vr=1
br=0
br=1
br=2
br=3
br=4
br=5
wd=0
wd=1
wd=2
ln=0
ln=1
ln=2
df=0
df=1
ec=0
bf=0
st=0
st=1
Command Sets