ZyXEL Communications Omni 56K II User Manual page 62

Omni 56K II and Omni 56K Plus II User's Guide
COMMAND
+FMDL?
+FMFR?
+FMINSP=n
+FPHCTO=
<value>
+FPTS=n
+FREL=n
+FREV?
+FSPL=n
5-16
Indicates that a document is available for polling.
Request the DCE model.
Request the DCE manufacturer.
Minimum phase C speed parameter.
2400 bps.
4800 bps.
7200 bps.
9600 bps.
12000 bps.
14400 bps.
DTE Phase C response time-out:
Determines how long the DCE will wait for a command after reaching the
end of data when transmitting in Phase C.
<value>=0 to 255; 100 ms units.
Page transfer status
Received page status - good.
Received page status - bad; retrain requested.
Received page status - good; retrain requested.
Received page status - bad; procedure interrupt requested.
Received page status - good; procedure interrupt requested.
Phase C received EOL alignment:
The EOL patterns are bit aligned as received.
The last received bits of EOL patterns are byte aligned by the DCE, with
necessary zero fill bits inserted. Refer to TIA PN-2388 for details.
Request the DCE revision identification.
"Enable polling" command:
Disable polling.
Enable polling.
DESCRIPTION VALUE
n=1
n=0
n=1
n=2
n=3
n=4
n=5
0-255
n=1
n=2
n=3
n=4
n=5
n=0
n=1
n=0
n=1
Command Sets