Table 21 Status Screen - ZyXEL Communications Network Device P-2602 User Manual

P-2602H(W)(L)-DxA Series User's Guide
Each field is described in the following table.

Table 21 Status Screen

LABEL
Refresh Interval
Apply
Device Information
Host Name
Model Number This is the model name of your device.
MAC Address
ZyNOS
Firmware
Version
DSL Firmware
Version
WAN Information
DSL Mode
IP Address
IP Subnet
Mask
Default
Gateway
VPI/VCI
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN Information ("W" models only)
SSID
Channel
Security
84
DESCRIPTION
Enter how often you want the ZyXEL Device to update this screen.
Click this to update this screen immediately.
This field displays the ZyXEL Device system name. It is used for identification. You
can change this in the Maintenance > System > General screen's System Name
field.
This is the MAC (Media Access Control) or Ethernet address unique to your ZyXEL
Device.
This field displays the current version of the firmware inside the device. It also
shows the date the firmware version was created. Click this to go to the screen
where you can change it.
This field displays the current version of the device's DSL modem code.
This is the DSL standard that your ZyXEL Device is using.
This field displays the current IP address of the ZyXEL Device in the WAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in
the wizard or WAN screen.
This field displays the current IP address of the ZyXEL Device in the LAN. Click
this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
This is the descriptive name used to identify the ZyXEL Device in the wireless
LAN. Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the wireless
LAN.
Chapter 6 Status Screens