Configuring Firewall Rules - ZyXEL Communications Network Device P-2602 User Manual

Table 71 Firewall Rules (continued)
LABEL
Log
Modify
Order
Apply
Cancel

14.6.1 Configuring Firewall Rules

Refer to Section 13.1 on page 181
In the Rules screen, select an index number and click Add or click a rule's Edit icon to
display this screen and refer to the following table for information on the labels.
Chapter 14 Firewall Configuration
DESCRIPTION
This field shows you whether a log is created when packets match this rule (Yes) or
not (No).
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing firewall rule. A window displays asking
you to confirm that you want to delete the firewall rule. Note that subsequent firewall
rules move up by one when you take this action.
Click the Move icon to display the Move the rule to field. Type a number in the Move
the rule to field and click the Move button to move the rule to the number that you
typed. The ordering of your rules is important as they are applied in order of their
numbering.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
for more information.
P-2602H(W)(L)-DxA Series User's Guide
199