Advanced Internet Access Setup; Figure 49 Advanced Internet Access Setup; Table 27 Advanced Internet Access Setup - ZyXEL Communications Network Device P-2602 User Manual

Table 26 Internet Access Setup (continued)
LABEL
Cancel
Advanced Setup

7.5.1 Advanced Internet Access Setup

To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in
the Internet Access Setup screen. The screen appears as shown.

Figure 49 Advanced Internet Access Setup

The following table describes the labels in this screen.

Table 27 Advanced Internet Access Setup

LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
Multicast
ATM QoS
ATM QoS Type
Chapter 7 WAN Setup
DESCRIPTION
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice
or data traffic. Select UBR (Unspecified Bit Rate) for applications that are non-time
sensitive, such as e-mail. Select VBR-RT (real-time Variable Bit Rate) type for
applications with bursty connections that require closely controlled delay and delay
variation. Select VBR-nRT (non real-time Variable Bit Rate) type for connections
that do not require closely controlled delay and delay variation.
P-2602H(W)(L)-DxA Series User's Guide
101