P-2602H(W)(L)-DxA Series User's Guide
Log Command Example
This example shows how to set the ZyXEL Device to record the access logs and alerts and
then view the results.
Figure 223 Log Command Example
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
#
.time
message
7|01/01/2000 09:40:13 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
8|01/01/2000 09:40:07 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
9|01/01/2000 09:40:04 |192.168.1.1:3
RWARD
Router reply ICMP packet: ICMP(type:3, code:1)
10|01/01/2000 09:40:04 |192.168.1.33:1199
RWARD
Firewall default policy: TCP (L to W)
11|01/01/2000 09:40:04 |192.168.1.1:53
RWARD
none: UDP
392
source
destination
|192.168.1.33:1
|192.168.1.33:1
|192.168.1.33:1
|207.69.188.186:110
|192.168.1.33:1200
Appendix I Log Descriptions
notes
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO
|ACCESS FO