Figure 96 Phone Book > Incoming Call Policy; Table 64 Phone Book > Incoming Call Policy - ZyXEL Communications Network Device P-2602 User Manual

Figure 96 Phone Book > Incoming Call Policy
You can create two sets of call-forwarding rules. Each one is stored in a call-forwarding table.
Each field is described in the following table.
Table 64 Phone Book > Incoming Call Policy
LABEL
Table Number
Forward to
Number Setup
Unconditional
Forward to
Number
Busy Forward to
Number
No Answer
Forward to
Number
No Answer
Waiting Time
Chapter 11 Voice
DESCRIPTION
Select the call-forwarding table you want to see in this screen. If you change this
field, the screen automatically refreshes.
The ZyXEL Device checks these rules, in the order in which they appear, after it
checks the rules in the Advanced Setup section.
Select this if you want the ZyXEL Device to forward all incoming calls to the
specified phone number, regardless of other rules in the Forward to Number
section. Specify the phone number in the field on the right.
Select this if you want the ZyXEL Device to forward incoming calls to the specified
phone number if the phone port is busy. Specify the phone number in the field on
the right. If you have call waiting, the incoming call is forwarded to the specified
phone number if you reject or ignore the second incoming call.
Select this if you want the ZyXEL Device to forward incoming calls to the specified
phone number if the call is unanswered. (See No Answer Waiting Time.) Specify
the phone number in the field on the right.
This field is used by the No Answer Forward to Number feature and No Answer
conditions below.
Enter the number of seconds the ZyXEL Device should wait for you to answer an
incoming call before it considers the call is unanswered.
P-2602H(W)(L)-DxA Series User's Guide
175