Analog Phone Screen; Figure 91 Phone > Analog Phone; Table 57 Phone > Analog Phone - ZyXEL Communications Network Device P-2602 User Manual

11.13 Analog Phone Screen

Use this screen to control which SIP accounts and PSTN line each phone uses. To access this
screen, click VoIP > Phone > Analog Phone.
Figure 91 Phone > Analog Phone
Each field is described in the following table.
Table 57 Phone > Analog Phone
LABEL
Phone Port
Settings
Outgoing Call Use
SIP1
SIP2
Incoming Call
apply to
SIP1
SIP2
PSTN Line ("L"
models only)
Chapter 11 Voice
DESCRIPTION
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Select this if you want this phone port to use the SIP1 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first.
Select this if you want this phone port to use the SIP2 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use SIP2 first.
Select this if you want to receive phone calls for the SIP1 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
Select this if you want to receive phone calls for the SIP2 account on this phone
port. If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Note: When the ZyXEL Device does not have power, regardless of
the settings you configure, only the phone connected to the
PHONE 1 port can be used for making calls. Ensure you
know which phone this is, so that in case of emergency you
can make outgoing calls.
P-2602H(W)(L)-DxA Series User's Guide
165